How to Flush Your Water Heater: A Step-by-Step Guide
Regularly flushing your water heater is essential for maintaining its efficiency and prolonging its lifespan. In this comprehensive guide, we will walk you through the process of flushing your water heater, ensuring clean and clear hot water for your household. Follow these nine steps to successfully flush your water heater.
Step 1: Turn Off the Cold Water Supply: Begin by locating the cold water supply valve for your water heater. In older homes, you may need to turn off the water at the main supply line or at the water softener’s shut-off valve. Ensure a complete halt to the water flow before proceeding.
Step 2: Turn Off or Turn Down the Water Heater Thermostat: To prevent potential damage, adjust the thermostat of your water heater. For natural gas heaters, close the gas supply valve and avoid heating the tank without water. Some heaters have a “vacation” mode, which can be utilized to disable the heating function temporarily.
Step 3: Connect a Garden Hose to the Drain Valve: Attach a garden hose to the drain valve located near the bottom of the water heater. Ensure the other end of the hose leads to a safe drainage area outside, away from foundations and plants. To avoid dealing with hot water, you can let the heater cool overnight or run the hot water tap for a few minutes before starting.
Step 4: Open All Hot Water Faucets: To facilitate faster draining, open all hot water faucets in your house. This action creates a vacuum effect, expediting the water flow from the tank. Keep the faucets open throughout the flushing process.
Step 5: Open the Water Heater’s Drain Valve: Open the drain valve of your water heater and monitor the water flow through the hose. Observe the amount of sediment being flushed out and ensure the water is flowing as expected. Take caution to prevent accidents and keep children and pets away from the draining area.
Step 6: Rinse the Tank: Once the tank has completely drained, turn on the cold water supply. This will help rinse any remaining sediment from the bottom of the tank. Allow the water to run for a few minutes and check the clarity at the end of the hose. If necessary, repeat the flushing process until the water runs clear.
Step 7: Remove Sediment from the Drain Valve: Disconnect the hose from the drain valve and use a wet/dry vacuum to remove any sediment lodged in the opening. This step prevents clogging and potential leaks when shutting off the valve. Afterward, close the drain valve and turn the cold water supply back on.
Step 8: Clear Air Traps: Leave the hot water faucets open until water starts flowing steadily from them. This prevents air from becoming trapped in the system. Initially, you may observe rust or sediment in the water, but once it clears, you can safely turn off the faucets.
Step 9: Restore and Reset: Reset the water heater thermostat to your desired temperature setting. For gas water heaters, reopen the gas supply valve and relight the pilot following the manufacturer’s instructions.
Flushing your water heater regularly is a simple yet vital maintenance task that ensures optimal performance and prolongs its lifespan. Make this process a routine at least once a year to maintain your water heater’s efficiency.
The Pros and Cons of Tankless Hot Water Heaters
Picture this: you’re in the middle of a relaxing hot shower, shampoo in your hair, in the middle of belting out your favorite song, and suddenly, the water turns lukewarm. Panic sets in as you try to rinse quickly, only for the water to turn ice-cold, leaving you shivering, and shampoo-soaked. But fear not, there’s... Continue reading→
Should you go tankless?
You've heard the hype but are Tankless Water Heaters all that? Our answer? Yep! They are all that and a bag of chips! Why? For so many reasons ranging from the savings to the consistent hot water. Let's discuss the pros and the cons and what makes it THE water heater to own. The Pros... Continue reading→
Relighting the Pilot Light on Your Gas Water Heater
When the hot water heater in your house suddenly stops working, it can disrupt your daily routines, from showers and laundry to dishwashing. For those with a gas-powered hot water heater, a common culprit for this issue is a pilot light that has gone out. In this article, we’ll guide you through the process of... Continue reading→
